The Zune Pinouts

rafter94 · 10-13-2007, 11:53 AM

The Zune pinouts found so far are:

Pin 01 - USB 5VDC(+) (common with Pins 2,3)
Pin 02 - 5VDC(+) (common with pins 1,3)
Pin 03 - 5VDC(+) (common with pins 1,2)
Pin 04 - Unknown (used on travel remote) 1.75 VDC (+)
Pin 05 - Unknown (used on travel remote) 1.75 VDC (+)
Pin 06 -
Pin 07 -
Pin 08 -
Pin 09 - Video (+)
Pin 10 -
Pin 11 -
Pin 12 -
Pin 13 - Audio L (+) (also audio on travel remote)
Pin 14 - Audio R (+) (Also audio on travel remote)
Pin 15 -
Pin 16 -
Pin 17 - Unknown (used on travel remote) these are likely our trigger
Pin 18 - Unknown (used on travel remote) these are likely our trigger
Pin 19 - Ground (common with Pins 22,23,24,and shield)
Pin 20 - USB Data (-)
Pin 21 - USB Data (+)
Pin 22 - USB Ground (common with Pins 19,23,24,and shield)
Pin 23 - Ground (common with Pins 22,19,24,and shield)
Pin 24 - Ground (common with Pins 22,23,19,and shield)

Trigger: Used when an accessory gets connected to inform Zune.

Tom_in_AZ · 10-19-2007, 01:57 AM

I'd love to see someone make an adapter to allow a Zune to directly connect to any of the MANY iPod accessories. At this point though I am content with trying this on my own, the issue is getting the connectors. Does anyone have a source for both?

You · 10-19-2007, 01:37 PM

check here

Tom_in_AZ · 10-20-2007, 10:41 AM

Appreciate the link. I found some more info on this and it seems I might be opening a can of worms right now. I am going to hang in there a bit longer to see if someone makes something that we can use a little more plug and play. Last thing I want is to blow up my zune.

ZeroCool2021 · 10-22-2007, 01:04 PM

What are these "pins" ???
The conectors on the sync cable?

You · 10-22-2007, 01:18 PM

Yes

Jason · 11-04-2007, 10:06 PM

so would it be possible to make a bypass for the headphone jack?, the one on my zune, is crapped out

Bman22 · 11-05-2007, 08:14 PM

has anyone tried to make a video cable for this. I just think that the amount of money the actual cable costs is crazy

Jason · 11-07-2007, 11:55 PM

anyone..... bueller..... bueller..... buulerrrr.......

Jason · 11-08-2007, 06:12 PM

this was posted at zuney, and zune-online

http://www.zune-online.com/news/zune...d-pinouts.html

You · 11-09-2007, 05:14 PM

Quote:

Originally Posted by Jason

this was posted at zuney, and zune-online

http://www.zune-online.com/news/zune...d-pinouts.html

so because it was found at Zuney it is fake?

Jason · 11-09-2007, 05:46 PM

not exactly, he just put it on there and it made it sound like he found them, and he didnt cite a source, so it looked like he tried to make it look like his own

but can anyone help me please with my previous question

the.one · 11-13-2007, 05:49 PM

Quote:

Originally Posted by Bman22

has anyone tried to make a video cable for this. I just think that the amount of money the actual cable costs is crazy

I had bought a generic "IPod Video Cable" from Wal-Mart which was less then $10 and works perfectly! You should try it!

Tom_in_AZ · 11-14-2007, 06:40 AM

Agreed, I picked up a white cable from Walmart around $9 and it works perfect for video output, and the cable is white in color.

Jason · 11-16-2007, 04:09 AM

someone answer my question... my headphone port is now completly ripped off

You · 11-16-2007, 09:37 AM

Yes it is possible, in fact the Zune Dock does just that. Basically just take the pinouts and attach them to a headphone jack, or simply reattach a new one to the top

Jason · 11-16-2007, 10:13 AM

i did try that last night, and the pins are just too close together to solder, with my iron...

Pocker09 · 11-17-2007, 01:48 PM

can we make our own output cables with the pinout info? like if i wanted to make an audio out with out it being amplified(like the headphone jack)?
or maybe a total A/V for tv?