Zune wont respond/only shows battery charging symbol
For those of you having problems with your Zune not turning on or being recognized by your computer and have been unsuccessfully with resetting I have found a common problem amongst zunes. Once you have the back cover off and pull the hard drive out you see a silver cover underneath. If you lift up that silver cover you will see another darker silver cover underneath lift up and you should see where the 4 wires connect to the board. The most common problem is that the blue wire is detached from the board (at least on the few I have taken apart) in order to fix you need a solder iron and solder. You must solder the lose end of the wire and then drop a little bit of solder on the solder spot where the blue wire is missing from. Once you do this you should be able to melt the solder on the board and attach the wire. Ohh yea I almost forgot GO BUCKEYES
|
